Description

Fits the following engines:

  • RB30 Single Cam
PLEASE NOTE: If you would like to purchase the Mechanical Fuel Pump Kit WITHOUT a trigger kit, then CLICK HERE for our 'custom' Mechanical Fuel Pump kit listing.

With the introduction of Alcohol based fuels, the modern performance vehicle is using much more fuel than it ever was before. Our 'Entry Level' Mechanical Fuel Pump kit addresses the need for dependable fuel delivery and accurate timing when increasing power on your Nissan RB30 single cam engine.

Rather than add more fuel pumps to address the increased volume of fuel required, PRP has designed this kit to house many of the leading mechanical fuel pumps on the market today including, "Kinsler, Weldon, Waterman, and Enderlie". The fuel pumps are fitted onto a billet alloy bracket that utilizes the cam gear to drive the mechanical fuel pump and the entire kit works seamlessly with the supplied trigger kit and Billet Single CAS bracket with zero interference. 

PRP mechanical fuel pump kits have many benefits such as:

  • Easy installation
  • No wiring needed or expensive bulkheads.
  • Incorporates our 'Race Series' Trigger kit.
  • Efficient on your electrical system as they not use electricity at all.
  • Makes no noise compared to their electronic counterparts.
  • Come as a fully integrated kit using our latest Trigger Kit options. 
  • Will not fail when installed correctly and provides easy access for diagnostics.
  • Is a tried and proven system that has been used for DECADES in Indy and Nascar applications.
  • Cost effective, especially when you consider the money saved on fitting and wiring up an electrical fuel pump system.
  • Extremely reliable and has been used in some monster street GTR's making over 2000whp and some tube chassis RB and JZ examples are making close to 3000whp!

  • This bulletproof fuel system comes with our 'Street Series Trigger Kit', which uses a world renowned top and bottom Cherry ZF sensor to give a power rating of up to 800whp. This kit is a widely used street combo for RB owners that want a versatile fuel and trigger kit system that is easy to setup and reliable!

    PRP ' STREET SERIES ' RB30 Mechanical Fuel Pump Kit includes:

    • PRP Billet Single CAS bracket
    • Billet trigger bracket and trigger sensor mount as an 'all in one unit'.
    • Spider Uni type coupling that absorbs shock, reverberation, and noise prolonging equipment life.
    • Easy to assemble hardware with excellent support, we pride ourselves on being industry leaders with tech, warranty and support.
    • This kit has been designed to incorporate the use of any of the leading pumps on the market including Kinsler, Weldon, Waterman, and Enderlie.
    • 1 piece 12 tooth trigger wheel and bottom crank gear assembly.
    • ZF Electronics Hall effect sensors (cam and crank).
    • CNC 5 axis machined Bottom sensor mount.
    • All plugs, pins, gauze, and heat shrink. required. 
    • Teflon shielded twin core wire. 
    • Bolts and general hardware. 
    • Top trigger plate. 
    • Stainless cam plate. 
    • Bolts and hardware Deutsche connector plugs sets, heat shrink, braid. 
    • Custom made silicone injection moulded 90 degree boots (top and bottom)
    • Lifetime warranty on PRP Billet hardware, 1 year on electronics and pumps.

    For more information on the trigger kit included in this package, please click HERE.

      PLEASE SPECIFY YOUR CUSTOM COLOUR IN THE CART AREA "SPECIAL NOTES" SECTION, CUSTOM COLOURS INCLUDE:

      • Gold
      • Bronze
      • Grey
      • Teal
      • Orange
      • Green
      • Cardo Zinc

      *CRANK SENSOR BRACKET HOLDERS COME IN BLACK ONLY!*

      (Image is for reference only) 

      Specifications

      PRP mechanical fuel pump kits have many benefits such as:

      • Easy installation
      • No wiring needed or expensive bulkheads.
      • Incorporates our 'Race Series' Trigger kit.
      • Efficient on your electrical system as they not use electricity at all.
      • Makes no noise compared to their electronic counterparts.
      • Come as a fully integrated kit using our latest Trigger Kit options. 
      • Will not fail when installed correctly and provides easy access for diagnostics.
      • Is a tried and proven system that has been used for DECADES in Indy and Nascar applications.
      • Cost effective, especially when you consider the money saved on fitting and wiring up an electrical fuel pump system.
      • Extremely reliable and has been used in some monster street GTR's making over 2000whp and some tube chassis RB and JZ examples are making close to 3000whp!

      Compatibility

      • 1996 - 2007 Nissan Stagea
      • 1985 - 2004 Nissan Skyline
      • 1988 - 2004 Nissan Cefiro

      Fits the following engines:

      • RB30 Single Cam
      PLEASE NOTE: If you would like to purchase the Mechanical Fuel Pump Kit WITHOUT a trigger kit, then CLICK HERE for our 'custom' Mechanical Fuel Pump kit listing.

      With the introduction of Alcohol based fuels, the modern performance vehicle is using much more fuel than it ever was before. Our 'Entry Level' Mechanical Fuel Pump kit addresses the need for dependable fuel delivery and accurate timing when increasing power on your Nissan RB30 single cam engine.

      Rather than add more fuel pumps to address the increased volume of fuel required, PRP has designed this kit to house many of the leading mechanical fuel pumps on the market today including, "Kinsler, Weldon, Waterman, and Enderlie". The fuel pumps are fitted onto a billet alloy bracket that utilizes the cam gear to drive the mechanical fuel pump and the entire kit works seamlessly with the supplied trigger kit and Billet Single CAS bracket with zero interference. 

      PRP mechanical fuel pump kits have many benefits such as:

    • Easy installation
    • No wiring needed or expensive bulkheads.
    • Incorporates our 'Race Series' Trigger kit.
    • Efficient on your electrical system as they not use electricity at all.
    • Makes no noise compared to their electronic counterparts.
    • Come as a fully integrated kit using our latest Trigger Kit options. 
    • Will not fail when installed correctly and provides easy access for diagnostics.
    • Is a tried and proven system that has been used for DECADES in Indy and Nascar applications.
    • Cost effective, especially when you consider the money saved on fitting and wiring up an electrical fuel pump system.
    • Extremely reliable and has been used in some monster street GTR's making over 2000whp and some tube chassis RB and JZ examples are making close to 3000whp!

    • This bulletproof fuel system comes with our 'Street Series Trigger Kit', which uses a world renowned top and bottom Cherry ZF sensor to give a power rating of up to 800whp. This kit is a widely used street combo for RB owners that want a versatile fuel and trigger kit system that is easy to setup and reliable!

      PRP ' STREET SERIES ' RB30 Mechanical Fuel Pump Kit includes:

      • PRP Billet Single CAS bracket
      • Billet trigger bracket and trigger sensor mount as an 'all in one unit'.
      • Spider Uni type coupling that absorbs shock, reverberation, and noise prolonging equipment life.
      • Easy to assemble hardware with excellent support, we pride ourselves on being industry leaders with tech, warranty and support.
      • This kit has been designed to incorporate the use of any of the leading pumps on the market including Kinsler, Weldon, Waterman, and Enderlie.
      • 1 piece 12 tooth trigger wheel and bottom crank gear assembly.
      • ZF Electronics Hall effect sensors (cam and crank).
      • CNC 5 axis machined Bottom sensor mount.
      • All plugs, pins, gauze, and heat shrink. required. 
      • Teflon shielded twin core wire. 
      • Bolts and general hardware. 
      • Top trigger plate. 
      • Stainless cam plate. 
      • Bolts and hardware Deutsche connector plugs sets, heat shrink, braid. 
      • Custom made silicone injection moulded 90 degree boots (top and bottom)
      • Lifetime warranty on PRP Billet hardware, 1 year on electronics and pumps.

      For more information on the trigger kit included in this package, please click HERE.

        PLEASE SPECIFY YOUR CUSTOM COLOUR IN THE CART AREA "SPECIAL NOTES" SECTION, CUSTOM COLOURS INCLUDE:

        • Gold
        • Bronze
        • Grey
        • Teal
        • Orange
        • Green
        • Cardo Zinc

        *CRANK SENSOR BRACKET HOLDERS COME IN BLACK ONLY!*

        (Image is for reference only) 

        • 1996 - 2007 Nissan Stagea
        • 1985 - 2004 Nissan Skyline
        • 1988 - 2004 Nissan Cefiro

        Best Sellers