Description

The G5 CAN Connection Cable provides a ready-made wiring solution to connect CAN bus accessories to the Link G5 Voodoo Neo ECU via its front-panel WEIPU CAN connector. The 300 mm cable terminates in a DTM4 male connector on one end and a WEIPU SF610B/P4 connector on the other, and also supplies 12V switched power to the connected CAN device directly from the ECU.

  • Cable length: 300 mm
  • Connectors: DTM4 Male to WEIPU SF610B/P4
  • DTM4 pinout: Pin 1 = 12V, Pin 2 = Ground, Pin 3 = CAN L, Pin 4 = CAN H
  • Compatible with G5 Voodoo Neo 4 and G5 Voodoo Neo 6 ECUs (CAN1 port)
  • Pin-compatible with Link's full range of CAN accessories including TCC06 EGT module and other DTM4 CAN devices

This cable is the correct adaptor for linking CAN accessories to the G5 Voodoo Neo platform, removing the need for custom wiring while ensuring a secure, weather-resistant connection at the ECU.

Specifications

  • 300mm CAN Cable. Required to add CAN 1 communication to G5 Voodoo Neo ECU's which have CAN accessible via the 4-Pin round Weipu CAN connector on the front of the ECU.
  • Compatible ECU's:
  • G5 Voodoo Neo (CAN1)
  • Specs
  • DTM4 Male to WEiPU SF610B/P4. CAN Loom Length 300mm. Power for CAN is supplied via this cable from the ECU.
  • DTM4 Pin Out
  • Pin 4: CAN H
  • Pin 3: CAN L
  • Pin 2: Ground
  • Pin 1: 12V

Compatibility

  • Universal Part

The G5 CAN Connection Cable provides a ready-made wiring solution to connect CAN bus accessories to the Link G5 Voodoo Neo ECU via its front-panel WEIPU CAN connector. The 300 mm cable terminates in a DTM4 male connector on one end and a WEIPU SF610B/P4 connector on the other, and also supplies 12V switched power to the connected CAN device directly from the ECU.

  • Cable length: 300 mm
  • Connectors: DTM4 Male to WEIPU SF610B/P4
  • DTM4 pinout: Pin 1 = 12V, Pin 2 = Ground, Pin 3 = CAN L, Pin 4 = CAN H
  • Compatible with G5 Voodoo Neo 4 and G5 Voodoo Neo 6 ECUs (CAN1 port)
  • Pin-compatible with Link's full range of CAN accessories including TCC06 EGT module and other DTM4 CAN devices

This cable is the correct adaptor for linking CAN accessories to the G5 Voodoo Neo platform, removing the need for custom wiring while ensuring a secure, weather-resistant connection at the ECU.

  • 300mm CAN Cable. Required to add CAN 1 communication to G5 Voodoo Neo ECU's which have CAN accessible via the 4-Pin round Weipu CAN connector on the front of the ECU.
  • Compatible ECU's:
  • G5 Voodoo Neo (CAN1)
  • Specs
  • DTM4 Male to WEiPU SF610B/P4. CAN Loom Length 300mm. Power for CAN is supplied via this cable from the ECU.
  • DTM4 Pin Out
  • Pin 4: CAN H
  • Pin 3: CAN L
  • Pin 2: Ground
  • Pin 1: 12V
  • Universal Part

Best Sellers