Adjustable & Bent to suit a Long Range Tank & 3" Lift.

For significantly larger lifts we have TANP48AB which has a substantial bend offering increased clearance to TANP47B. The TANP48AB offers 'on vehicle' adjustment to correct pinion angle on larger lifts. The TANP48AB arm must be fitted with a 100mm bump stop spacer (not included) to maintain correct clearance from arm to chassis. Premature failure will be experienced if the arm is incorrectly and/or an appropriate sized bumpstop spacer is not utilised.

Roadsafe Rear Lower & Upper Trailing Arms are built tough, so when you bump them up against rocks & tough terrain, they won't bend as much as standard arms. You've really got to give these ones a decent smack to get the 5mm wall thickness to buckle in.

We're not claiming Roadsafe arms are infallible, there will always be a bloke who wants to hang his truck up by the lower arms with bending consequences, but for your average 4WDer one set should see you through the life of your truck.

Manufactured to factory bush specifications & supplied complete with high flex rubber bushings.

Features:

• Rubber Bushings at both ends
• 34mm OD Tube
• 6.5m Wall Thickness
• Arms are sold as "EACH" if you require 2 then please order accordingly.