Description

ProECU USB Cable Programming Kit

 

The ProECU Programming Kit can be used by car enthusiasts, and owner clubs alike to both diagnose and program a wide variety of vehicles, Tune files are available from a wide network of Ecu Tek master tuners.  

The kits require a Laptop and a wired connection from there to the OBD II port. The ProECU USB kit, pictured above, has the interface included in the cable and otherwise there is a Bluetooth version available which includes a seperate USB cable to join to a laptop. 

At its simplest, the programming kit can be used for diagnostics and data logging. However, its most impressive feature is to allow EcuTek Master Tuners to tune customer vehicles remotely. The Master Tuner supplies suitable ROM files to the vehicle owner, who can use it to program these ROM files into their own car. If any fine-tuning is required, the customer can data-log the car and send the logs to the Master Tuner for their scrutiny and advice. The kit will program and log all EcuTek Supported vehicles.

ProECU Minimum Hardware Requirements

  • Operating System – Windows 10 or 11 Recommended. Windows 7 and 8.1 are supported, however some features may not be available. Running the software inside a virtual machine (such as Parallels or VMware) is not supported.
  • Processor – 1 Gigahertz or faster 32-bit or 64-bit (x86 CPU’s only, ARM based processors are unsupported)
  • Memory – 1 Gigabyte or greater
  • Hard Drive Space – 250mb ON C: Drive for ProECU programming kit. 2gb for ProECU Tuning Suites
  • Display – 1024×768 minimum screen resolution
  • Ports – Two free USB ports are required to allow use of the EcuTek Vehicle Interface and the Licence Key

Specifications

Compatibility

  • Universal Part

ProECU USB Cable Programming Kit

 

The ProECU Programming Kit can be used by car enthusiasts, and owner clubs alike to both diagnose and program a wide variety of vehicles, Tune files are available from a wide network of Ecu Tek master tuners.  

The kits require a Laptop and a wired connection from there to the OBD II port. The ProECU USB kit, pictured above, has the interface included in the cable and otherwise there is a Bluetooth version available which includes a seperate USB cable to join to a laptop. 

At its simplest, the programming kit can be used for diagnostics and data logging. However, its most impressive feature is to allow EcuTek Master Tuners to tune customer vehicles remotely. The Master Tuner supplies suitable ROM files to the vehicle owner, who can use it to program these ROM files into their own car. If any fine-tuning is required, the customer can data-log the car and send the logs to the Master Tuner for their scrutiny and advice. The kit will program and log all EcuTek Supported vehicles.

ProECU Minimum Hardware Requirements

  • Operating System – Windows 10 or 11 Recommended. Windows 7 and 8.1 are supported, however some features may not be available. Running the software inside a virtual machine (such as Parallels or VMware) is not supported.
  • Processor – 1 Gigahertz or faster 32-bit or 64-bit (x86 CPU’s only, ARM based processors are unsupported)
  • Memory – 1 Gigabyte or greater
  • Hard Drive Space – 250mb ON C: Drive for ProECU programming kit. 2gb for ProECU Tuning Suites
  • Display – 1024×768 minimum screen resolution
  • Ports – Two free USB ports are required to allow use of the EcuTek Vehicle Interface and the Licence Key
  • Universal Part

Best Sellers