Description

Kings BatBlock25

12V Plug and Play Battery Box | Built in DCDC Charger | Battery Monitor | Lithium Compatible

12V MADE EASY

JUST ADD A BATTERY!

BatBlock is the plug and play pre-wired power solution you’ve been waiting for! Setting it up and using it couldn’t be easier. Simply add a 12V battery, and you have the perfect ready-to-use solution to power your gear on any adventure!

BUILT IN DCDC CHARGER

WITH MPPT SOLAR REGULATOR

Need that battery inside your BatBlock25 charged up? No problem! The pre-wired 25A DCDC charger makes it incredibly easy to charge from your vehicle or solar panels!

DIGITAL BATTERY MONITOR

WITH INTEGRATED SHUNT

Keeping an eye on your battery state of charge has never been easier with the built-in digital battery monitor. This allows you to see the charging amps going into, or coming out of your battery through any of the inputs or outputs. You’ll never be surprised by a flat battery again!

POWER ALL YOUR GEAR

USB OR 12V ACCESSORIES

BatBlock25 has been designed to power all your camping or road-tripping essentials! Featuring two 12V quick connect plugs, a 12V Cig Socket, two standard USB A sockets plus a USB QC and USB C PD outlet, you can run your portable fridge, camp lighting, 12V oven or charge your USB devices wherever you are! The best part is, whatever power you use will be shown on the Battery Monitor Display.

INVERTER-READY

HIGH CURRENT TERMINALS

BatBlock is fitted with inverter ready terminals rated for up to 120 Amps of current, so you can quickly and easily connect up to a 1500W Inverter to run those power hungry devices while you’re on the go! These terminals are also suitable for connecting a 240V to 12V battery charger, or any other high power 12V devices - again, any power you charge or discharge from the terminals will be shown on the digital display!

SUITS LITHIUM OR AGM

UP TO 120Ah

BatBlock has been designed to be modular, so rather than include a built-in battery that can’t be upgraded or replaced, BatBlock allows you to fit your own battery, and it’s perfectly suited to Kings Deep Cycle Lithium batteries up to 120Ah or AGM batteries up to 115Ah (Not suitable for Slim and Ultra-Slimline batteries).

IDEAL FOR PORTABLE

& PERMANENT SETUPS

The tough moulded handles on BatBlock make it super easy to carry anywhere you need it! Whether you’re going from the back of the car to the backyard BBQ, from the canopy to the campsite or the work trailer to the job site, BatBlock25 offers a lightweight, portable power solution. The integrated tie down points allow you to use BatBlock as a rugged, permanent power solution! These tie down points are designed to work perfectly with an Adventure Kings Tie Down kit, available separately.

TRIPLE QUICK CONNECT

& IGNITION WIRE INCLUDED

To make charging on the go easier - the Adventure Kings BatBlock includes a Triple Quick Connect Anderson-Style Plug with 7m of wire to connect to modern vehicles. Simply add a Kings 25A or 50A Wiring Kit to turn Batblock into an easy dual battery system. A standard anderson style quick connect plug will also work in the triple socket on BatBlock for older vehicles, offering the best of both worlds!

Dimensions

Specifications

  • Max. Supported Battery Size (LxWxH): 330 x 173 x 220 mm
  • Max. Continuous DCDC Charging Current: 25A
  • MPPT Solar Input Range: 10 - 32V
  • Compatible Battery Types: Lithium (LiFePO4), AGM, wet lead acid, gel, calcium with push button selection
  • Battery Monitor Display: YES - Backlit LCD (V, A, W, Ah, H, °C, %)
  • Shunt: YES - 500A rated
  • Input / Output: 2x 50A Combined rating quick connect plugs (input/output), 120A rated M8 threaded terminals
  • Inputs: 1x Quick connect solar input 1x triple quick connect alternator input
  • Outputs: 1x 12V cig socket, 2x USB A, 1x USB QC, 1x USB C PD
  • Isolator Switch: YES - with 200A fuse
  • Temperature Sensors: YES - DCDC charger + battery monitor
  • Fuses: YES - Internal fuses (*external blue ignition wire requires 3A fuse + holder if to be installed into vehicle)
  • Tie Down Points: YES - 4x M8 removable shoulder bolts
  • Case Material: Reinforced ABS
  • Weight: 6.1kg
  • Dimensions (LxWxH): 441 x 236 x 340 mm (460mm length incl. tie down points)
  • Warranty: 2 Years
  • Note: Battery not included

Kings BatBlock25

12V Plug and Play Battery Box | Built in DCDC Charger | Battery Monitor | Lithium Compatible

12V MADE EASY

JUST ADD A BATTERY!

BatBlock is the plug and play pre-wired power solution you’ve been waiting for! Setting it up and using it couldn’t be easier. Simply add a 12V battery, and you have the perfect ready-to-use solution to power your gear on any adventure!

BUILT IN DCDC CHARGER

WITH MPPT SOLAR REGULATOR

Need that battery inside your BatBlock25 charged up? No problem! The pre-wired 25A DCDC charger makes it incredibly easy to charge from your vehicle or solar panels!

DIGITAL BATTERY MONITOR

WITH INTEGRATED SHUNT

Keeping an eye on your battery state of charge has never been easier with the built-in digital battery monitor. This allows you to see the charging amps going into, or coming out of your battery through any of the inputs or outputs. You’ll never be surprised by a flat battery again!

POWER ALL YOUR GEAR

USB OR 12V ACCESSORIES

BatBlock25 has been designed to power all your camping or road-tripping essentials! Featuring two 12V quick connect plugs, a 12V Cig Socket, two standard USB A sockets plus a USB QC and USB C PD outlet, you can run your portable fridge, camp lighting, 12V oven or charge your USB devices wherever you are! The best part is, whatever power you use will be shown on the Battery Monitor Display.

INVERTER-READY

HIGH CURRENT TERMINALS

BatBlock is fitted with inverter ready terminals rated for up to 120 Amps of current, so you can quickly and easily connect up to a 1500W Inverter to run those power hungry devices while you’re on the go! These terminals are also suitable for connecting a 240V to 12V battery charger, or any other high power 12V devices - again, any power you charge or discharge from the terminals will be shown on the digital display!

SUITS LITHIUM OR AGM

UP TO 120Ah

BatBlock has been designed to be modular, so rather than include a built-in battery that can’t be upgraded or replaced, BatBlock allows you to fit your own battery, and it’s perfectly suited to Kings Deep Cycle Lithium batteries up to 120Ah or AGM batteries up to 115Ah (Not suitable for Slim and Ultra-Slimline batteries).

IDEAL FOR PORTABLE

& PERMANENT SETUPS

The tough moulded handles on BatBlock make it super easy to carry anywhere you need it! Whether you’re going from the back of the car to the backyard BBQ, from the canopy to the campsite or the work trailer to the job site, BatBlock25 offers a lightweight, portable power solution. The integrated tie down points allow you to use BatBlock as a rugged, permanent power solution! These tie down points are designed to work perfectly with an Adventure Kings Tie Down kit, available separately.

TRIPLE QUICK CONNECT

& IGNITION WIRE INCLUDED

To make charging on the go easier - the Adventure Kings BatBlock includes a Triple Quick Connect Anderson-Style Plug with 7m of wire to connect to modern vehicles. Simply add a Kings 25A or 50A Wiring Kit to turn Batblock into an easy dual battery system. A standard anderson style quick connect plug will also work in the triple socket on BatBlock for older vehicles, offering the best of both worlds!

Dimensions

  • Max. Supported Battery Size (LxWxH): 330 x 173 x 220 mm
  • Max. Continuous DCDC Charging Current: 25A
  • MPPT Solar Input Range: 10 - 32V
  • Compatible Battery Types: Lithium (LiFePO4), AGM, wet lead acid, gel, calcium with push button selection
  • Battery Monitor Display: YES - Backlit LCD (V, A, W, Ah, H, °C, %)
  • Shunt: YES - 500A rated
  • Input / Output: 2x 50A Combined rating quick connect plugs (input/output), 120A rated M8 threaded terminals
  • Inputs: 1x Quick connect solar input 1x triple quick connect alternator input
  • Outputs: 1x 12V cig socket, 2x USB A, 1x USB QC, 1x USB C PD
  • Isolator Switch: YES - with 200A fuse
  • Temperature Sensors: YES - DCDC charger + battery monitor
  • Fuses: YES - Internal fuses (*external blue ignition wire requires 3A fuse + holder if to be installed into vehicle)
  • Tie Down Points: YES - 4x M8 removable shoulder bolts
  • Case Material: Reinforced ABS
  • Weight: 6.1kg
  • Dimensions (LxWxH): 441 x 236 x 340 mm (460mm length incl. tie down points)
  • Warranty: 2 Years
  • Note: Battery not included

Best Sellers