Description

Increased Power
The C.A.R.B certified COBB Tuning SF Intake removes a pre-turbo restriction in the stock intake system. The SF Intake intake system utilizes several unique features in an effort to maintain optimal flow for performance while minimizing turbulence that can cause engine management problems. From a custom conical cloth air-filter element, a CFD-designed velocity stack leads to an unique air flow straightener grid designed to smooth the incoming air flow as it passes the Mass Air Flow sensor for precise readings. The intake utilizes a one piece design constructed from a high temperature plastic composite, saving weight and reducing heat transfer.

Increased Induction Sound
Enjoy the increased snarl from your engine and hear the turbo spool more clearly with the addition of the COBB Tuning SF Intake system. Turbocharger induction noise and bypass valve venting sound is much more audible using this intake system.

Easy to Install
The COBB Tuning SF Intake was designed to be easy to install without having to modify your car. Installation requires no cutting or trimming of any components and can be completed with simple hand tools. Simply remove the stock airbox and bolt the SF intake into place in just minutes.

Calibrations
All aftermarket intakes for MAZDASPEEDs require tuning in order to ensure the MAF sensor reads properly and the engine operates within safe parameters. COBB Tuning has you covered with Off-The-Shelf Maps for the Accessport, making it as easy as install, flash and go! Head over to the MAZDASPEED6 Accessport Map Database to view the full selection of SF Intake Maps for your vehicle.

Specifications

  • Colour: Blue
  • Increased power
  • C.A.R.B. certified
  • Integrated velocity stack
  • Integrated airflow straighteners
  • Cleanable, reusable custom filter element
  • Composite intake body for heat rejection
  • 4-ply steel reinforced silicone post-MAF hose
  • Induction and engine sounds more audible

What's Included

  • 1 x Cobb Intercooler Core
  • 2 x Cobb Mouting brackets
  • 3 x Intercooler Charge Pipes
  • 1 x 90 Degree Silicone Reducer
  • 1 x 2.75-2.5 inch reducer Coupler
  • 3 x 2.5 inch Straight Couplers
  • 1 x T-bolt Clamps - 2794
  • 1 x T-bolt Clamps - 2792
  • 8 x T-bolt Clamps - 2793
  • 1 x Stencil
  • 1 x Shift Weight
  • 1 x Pipe Sticker
  • 4 x 1/4 inch cap screws
  • 4 x 1/4 inch lock washers
  • 2 x M8-1.25 x 16 Cap Screws
  • 2 x 8mm lock washer
  • licence plate frame

Compatibility

  • 2010-2013 Mazda 3 MPS

Increased Power
The C.A.R.B certified COBB Tuning SF Intake removes a pre-turbo restriction in the stock intake system. The SF Intake intake system utilizes several unique features in an effort to maintain optimal flow for performance while minimizing turbulence that can cause engine management problems. From a custom conical cloth air-filter element, a CFD-designed velocity stack leads to an unique air flow straightener grid designed to smooth the incoming air flow as it passes the Mass Air Flow sensor for precise readings. The intake utilizes a one piece design constructed from a high temperature plastic composite, saving weight and reducing heat transfer.

Increased Induction Sound
Enjoy the increased snarl from your engine and hear the turbo spool more clearly with the addition of the COBB Tuning SF Intake system. Turbocharger induction noise and bypass valve venting sound is much more audible using this intake system.

Easy to Install
The COBB Tuning SF Intake was designed to be easy to install without having to modify your car. Installation requires no cutting or trimming of any components and can be completed with simple hand tools. Simply remove the stock airbox and bolt the SF intake into place in just minutes.

Calibrations
All aftermarket intakes for MAZDASPEEDs require tuning in order to ensure the MAF sensor reads properly and the engine operates within safe parameters. COBB Tuning has you covered with Off-The-Shelf Maps for the Accessport, making it as easy as install, flash and go! Head over to the MAZDASPEED6 Accessport Map Database to view the full selection of SF Intake Maps for your vehicle.

  • Colour: Blue
  • Increased power
  • C.A.R.B. certified
  • Integrated velocity stack
  • Integrated airflow straighteners
  • Cleanable, reusable custom filter element
  • Composite intake body for heat rejection
  • 4-ply steel reinforced silicone post-MAF hose
  • Induction and engine sounds more audible
  • 1 x Cobb Intercooler Core
  • 2 x Cobb Mouting brackets
  • 3 x Intercooler Charge Pipes
  • 1 x 90 Degree Silicone Reducer
  • 1 x 2.75-2.5 inch reducer Coupler
  • 3 x 2.5 inch Straight Couplers
  • 1 x T-bolt Clamps - 2794
  • 1 x T-bolt Clamps - 2792
  • 8 x T-bolt Clamps - 2793
  • 1 x Stencil
  • 1 x Shift Weight
  • 1 x Pipe Sticker
  • 4 x 1/4 inch cap screws
  • 4 x 1/4 inch lock washers
  • 2 x M8-1.25 x 16 Cap Screws
  • 2 x 8mm lock washer
  • licence plate frame
  • 2010-2013 Mazda 3 MPS

Best Sellers