Description

Skyjacker S20FS - Leaf Spring 1972-1977 International Scout II 4 Wheel Drive

SOFTRIDE SPRG 2IN. FRT SCOUTII

2in. FRT SPRG;71-80 SCOUT II

Softride® springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride® springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker® Softride® springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.

  • Constructed As Progressive Multileaf Packs
  • Load Capacity Will Be Equal or Greater Than OE
  • Made With American Steel
  • Limited Lifetime Warranty
Lift/Drop Height: 2 in.

Specifications

  • Constructed As Progressive Multileaf Packs
  • Load Capacity Will Be Equal or Greater Than OE
  • Made With American Steel
  • Limited Lifetime Warranty

Compatibility

  • 1980 International Scout II,
  • 1972 - 1979 International Scout II,
  • 1973 International Scout II,
  • 1972 - 1974 International Scout II,
  • 1975 International Scout II,
  • 1978 - 1979 International Scout II, Base
  • 1978 - 1979 International Scout II, SS2
  • 1978 - 1979 International Scout II, Terra
  • 1978 - 1979 International Scout II, Traveler

Skyjacker S20FS - Leaf Spring 1972-1977 International Scout II 4 Wheel Drive

SOFTRIDE SPRG 2IN. FRT SCOUTII

2in. FRT SPRG;71-80 SCOUT II

Softride® springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride® springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker® Softride® springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.

  • Constructed As Progressive Multileaf Packs
  • Load Capacity Will Be Equal or Greater Than OE
  • Made With American Steel
  • Limited Lifetime Warranty
Lift/Drop Height: 2 in.
  • Constructed As Progressive Multileaf Packs
  • Load Capacity Will Be Equal or Greater Than OE
  • Made With American Steel
  • Limited Lifetime Warranty
  • 1980 International Scout II,
  • 1972 - 1979 International Scout II,
  • 1973 International Scout II,
  • 1972 - 1974 International Scout II,
  • 1975 International Scout II,
  • 1978 - 1979 International Scout II, Base
  • 1978 - 1979 International Scout II, SS2
  • 1978 - 1979 International Scout II, Terra
  • 1978 - 1979 International Scout II, Traveler

Best Sellers