Description

Fits the following engines:

  • RB30 Single Cam

This is PRP's Big hitter, consisting of our full 'Pro Series' 36-2 trigger kit which utilizes a MoTeC reluctor / sensor with our all-new MoTeC cam hall effect sensor, a completely sealed sensor with external plug system!

This high end pro series trigger kit is specifically designed to be the ULTIMATE in trigger systems as it has flawless resolution and up to 3 times more data than our current 12 tooth system, this trigger kit is designed for applications up to a whopping 3000whp!

When designing this kit, we set out to create a non-balancer-based trigger wheel as balancer casings just wander too much for our liking. We had to compromise, as it also needed to work with a rather large sensor being the ultimate sensor of choice for our intended application, hence the 'swept-back' position sensor mount design.

The RB30 SOHC 'Pro Series Trigger Kit' comes with the following: 

    UPPER camshaft trigger kit:

    • CAS bracket.
    • Top sensor bracket.
    • Cam trigger plate.
    • Nylon braid and dual wall heat shrink.
    • MoTeC reluctor style sensor (with MoTeC support).
    • Custom made silicone injection moulded 90 degree boot.
    • Bolts and hardware Deutsche connector plugs sets, heat shrink, braid. 
    • Lifetime warranty on PRP Billet hardware, 1 year on electronics.

    LOWER crankshaft trigger kit:

    • Teflon shielded twin core wire.
    • CNC 5 axis machined Bottom sensor mount.
    • MoTeC reluctor style sensor (with MoTeC support).
    • 1 piece 36-2 trigger wheel and bottom crank gear assembly.
    • Custom made silicone injection moulded 90 degree boot.
    • Bolts and hardware Deutsche connector plugs sets, heat shrink, braid. 
    • Lifetime warranty on PRP Billet hardware, 1 year on electronics.

    CRITICAL INFORMATION:

    • With the introduction of new sequential smart coils, you may need a dizzy block off, CLICK HERE to get your dizzy block off plate.
    • This kit comes BY DEFAULT to suit Small bore mounts from the following mechanical fuel pumps: Kinsler / Weldon / Waterman.
    • If you require this kit to be made to suit Large bore mounts for the following mechanical fuel pumps: Enderlie / Aeromotive / Magnus, then please LEAVE A NOTE in the CART AREA when checking out and we will accommodate your request at NO CHARGE.

    PLEASE SPECIFY YOUR CUSTOM COLOUR IN THE CART AREA "SPECIAL NOTES" SECTION, CUSTOM COLOURS INCLUDE:

    • Gold
    • Bronze
    • Grey
    • Teal
    • Orange
    • Green
    • Cardo Zinc

    *CRANK SENSOR BRACKET HOLDERS COME IN BLACK ONLY!*

    Specifications

    Compatibility

    • 1996 - 2007 Nissan Stagea
    • 1985 - 2004 Nissan Skyline
    • 1988 - 2004 Nissan Cefiro

    Fits the following engines:

    • RB30 Single Cam

    This is PRP's Big hitter, consisting of our full 'Pro Series' 36-2 trigger kit which utilizes a MoTeC reluctor / sensor with our all-new MoTeC cam hall effect sensor, a completely sealed sensor with external plug system!

    This high end pro series trigger kit is specifically designed to be the ULTIMATE in trigger systems as it has flawless resolution and up to 3 times more data than our current 12 tooth system, this trigger kit is designed for applications up to a whopping 3000whp!

    When designing this kit, we set out to create a non-balancer-based trigger wheel as balancer casings just wander too much for our liking. We had to compromise, as it also needed to work with a rather large sensor being the ultimate sensor of choice for our intended application, hence the 'swept-back' position sensor mount design.

    The RB30 SOHC 'Pro Series Trigger Kit' comes with the following: 

      UPPER camshaft trigger kit:

      • CAS bracket.
      • Top sensor bracket.
      • Cam trigger plate.
      • Nylon braid and dual wall heat shrink.
      • MoTeC reluctor style sensor (with MoTeC support).
      • Custom made silicone injection moulded 90 degree boot.
      • Bolts and hardware Deutsche connector plugs sets, heat shrink, braid. 
      • Lifetime warranty on PRP Billet hardware, 1 year on electronics.

      LOWER crankshaft trigger kit:

      • Teflon shielded twin core wire.
      • CNC 5 axis machined Bottom sensor mount.
      • MoTeC reluctor style sensor (with MoTeC support).
      • 1 piece 36-2 trigger wheel and bottom crank gear assembly.
      • Custom made silicone injection moulded 90 degree boot.
      • Bolts and hardware Deutsche connector plugs sets, heat shrink, braid. 
      • Lifetime warranty on PRP Billet hardware, 1 year on electronics.

      CRITICAL INFORMATION:

      • With the introduction of new sequential smart coils, you may need a dizzy block off, CLICK HERE to get your dizzy block off plate.
      • This kit comes BY DEFAULT to suit Small bore mounts from the following mechanical fuel pumps: Kinsler / Weldon / Waterman.
      • If you require this kit to be made to suit Large bore mounts for the following mechanical fuel pumps: Enderlie / Aeromotive / Magnus, then please LEAVE A NOTE in the CART AREA when checking out and we will accommodate your request at NO CHARGE.

      PLEASE SPECIFY YOUR CUSTOM COLOUR IN THE CART AREA "SPECIAL NOTES" SECTION, CUSTOM COLOURS INCLUDE:

      • Gold
      • Bronze
      • Grey
      • Teal
      • Orange
      • Green
      • Cardo Zinc

      *CRANK SENSOR BRACKET HOLDERS COME IN BLACK ONLY!*

      • 1996 - 2007 Nissan Stagea
      • 1985 - 2004 Nissan Skyline
      • 1988 - 2004 Nissan Cefiro

      Best Sellers