Description

For the person who wants a subtle custom appearance with all the benefits that a Flowmaster® Cat-back exhaust system provides. S.O.S. (Single out side) systems are the perfect choice. Our Force II® systems delivers a moderate exterior tone and mild to moderate interior tone, and are suited to customers looking for efficiency improvements without a lot of noise. This system is constructed from large 3.00-inch mandrel-bent aluminized steel tubing flowing into a 70 Series Big Block II™ muffler for a deep mellow tone. The 3.00-inch tailpipe uses the factory hangers for a quick and easy installation and is finished off with a turn down style tip cut into the tubing. This exit location is especially recommended for towing applications since it will not be blowing exhaust on your boat or trailer. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation. Notes: Fits 2/4 wheel drive models and all wheelbases. Covered by our 3-year Limited Warranty.

Features

  • Includes Aluminum Heat Shield with Stainless Steel Clamps
  • Includes Hangers and Hardware for an Easy Installation
  • 70 Series Big Block II Performance Muffler
  • Dyno Tuned for Maximum Performance
  • Uses the Factory Hanger Locations
  • Moderate Exterior Exhaust Tone
  • Mandrel-bent 16 Gauge Tubing
  • Aluminized Steel Construction
  • 3-year Limited Warranty
  • Great Choice for Towing
  • Flowmaster Quality

Specifications

2WD/4WD2WD/4WD
BrandFlowmaster
California Proposition 65 RequiredNo
Catalytic Converter QuantityNot Included
Clamping TypeU Bolt
Clamps IncludedYes
Emission Code5
Exhaust SeriesForce II
Exhaust Tip ConnectionClamp-On
Exhaust Tip QuantitySold Separately
Exit PositionSingle Side Exit
Exit StyleSingle Side Exit
FinishAluminized
Gasket Or Seal IncludedNo
Grade TypePerformance
Hangers IncludedYes
Heat ShieldNo
Inlet Diameter3
Inlet TypeClamp On
Main Piping Diameter3.00
MaterialAluminized Steel
Mounting Bracket IncludedYes
Muffler Body Height5
Muffler Body Length22
Muffler Body MaterialAluminized Steel
Muffler Body ShapeOval
Muffler Body Width10
Muffler FinishBlack High-Temperature Paint Finish
Muffler Flanged InletNo
Muffler Flanged OutletNo
Muffler Inlet ConnectionSlip-Fit
Muffler Inlet Inside Diameter3.00
Muffler Inlet Outside Diameter3.13
Muffler Outlet ConnectionSlip-Fit
Muffler Outlet Quantity1
Muffler Part Number53070
Muffler Quantity1
Muffler Series70 Series Big Block
Muffler TypeChambered
Outlet Diameter3
Pipe MaterialAluminized Steel
Product TypeExhaust System
Sale CategoryExhaust
Single DualSingle
Sound LevelMild
Spring Bolt Kit IncludedNo
System TypeCat-back
Tail Pipe Outlet Outside Diameter3
Tail Pipe Quantity1
Tail Pipe Tapered OutletNo
Tip QuantityNot Included
Tubing Diameter3
TypeCat-Back
Valve IncludedNo
Valve TypeNot Included

Compatibility

  • 1987 - 1996 Ford F-150 XL 5.8
  • 1987 - 1996 Ford F-150 XL 5.0
  • 1987 - 1996 Ford F-150 XL 4.9
  • 1987 - 1992 Ford F-150 Custom 5.8
  • 1987 - 1992 Ford F-150 Custom 4.9
  • 1987 - 1992 Ford F-150 XLT Lariat 5.0
  • 1987 - 1992 Ford F-150 XLT Lariat 5.8
  • 1987 - 1992 Ford F-150 XLT Lariat 4.9
  • 1987 - 1992 Ford F-150 Custom 5.0
  • 1993 - 1996 Ford F-150 XLT 5.0
  • 1993 - 1996 Ford F-150 XLT 5.8
  • 1993 - 1996 Ford F-150 XLT 4.9
  • 1995 - 1996 Ford F-150 Special 5.0
  • 1995 - 1996 Ford F-150 Eddie Bauer 5.0
  • 1995 - 1996 Ford F-150 Eddie Bauer 5.8
  • 1995 - 1996 Ford F-150 Special 5.8
  • 1995 - 1996 Ford F-150 Special 4.9
  • 1995 - 1996 Ford F-150 Eddie Bauer 4.9

For the person who wants a subtle custom appearance with all the benefits that a Flowmaster® Cat-back exhaust system provides. S.O.S. (Single out side) systems are the perfect choice. Our Force II® systems delivers a moderate exterior tone and mild to moderate interior tone, and are suited to customers looking for efficiency improvements without a lot of noise. This system is constructed from large 3.00-inch mandrel-bent aluminized steel tubing flowing into a 70 Series Big Block II™ muffler for a deep mellow tone. The 3.00-inch tailpipe uses the factory hangers for a quick and easy installation and is finished off with a turn down style tip cut into the tubing. This exit location is especially recommended for towing applications since it will not be blowing exhaust on your boat or trailer. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation. Notes: Fits 2/4 wheel drive models and all wheelbases. Covered by our 3-year Limited Warranty.

Features

  • Includes Aluminum Heat Shield with Stainless Steel Clamps
  • Includes Hangers and Hardware for an Easy Installation
  • 70 Series Big Block II Performance Muffler
  • Dyno Tuned for Maximum Performance
  • Uses the Factory Hanger Locations
  • Moderate Exterior Exhaust Tone
  • Mandrel-bent 16 Gauge Tubing
  • Aluminized Steel Construction
  • 3-year Limited Warranty
  • Great Choice for Towing
  • Flowmaster Quality
2WD/4WD2WD/4WD
BrandFlowmaster
California Proposition 65 RequiredNo
Catalytic Converter QuantityNot Included
Clamping TypeU Bolt
Clamps IncludedYes
Emission Code5
Exhaust SeriesForce II
Exhaust Tip ConnectionClamp-On
Exhaust Tip QuantitySold Separately
Exit PositionSingle Side Exit
Exit StyleSingle Side Exit
FinishAluminized
Gasket Or Seal IncludedNo
Grade TypePerformance
Hangers IncludedYes
Heat ShieldNo
Inlet Diameter3
Inlet TypeClamp On
Main Piping Diameter3.00
MaterialAluminized Steel
Mounting Bracket IncludedYes
Muffler Body Height5
Muffler Body Length22
Muffler Body MaterialAluminized Steel
Muffler Body ShapeOval
Muffler Body Width10
Muffler FinishBlack High-Temperature Paint Finish
Muffler Flanged InletNo
Muffler Flanged OutletNo
Muffler Inlet ConnectionSlip-Fit
Muffler Inlet Inside Diameter3.00
Muffler Inlet Outside Diameter3.13
Muffler Outlet ConnectionSlip-Fit
Muffler Outlet Quantity1
Muffler Part Number53070
Muffler Quantity1
Muffler Series70 Series Big Block
Muffler TypeChambered
Outlet Diameter3
Pipe MaterialAluminized Steel
Product TypeExhaust System
Sale CategoryExhaust
Single DualSingle
Sound LevelMild
Spring Bolt Kit IncludedNo
System TypeCat-back
Tail Pipe Outlet Outside Diameter3
Tail Pipe Quantity1
Tail Pipe Tapered OutletNo
Tip QuantityNot Included
Tubing Diameter3
TypeCat-Back
Valve IncludedNo
Valve TypeNot Included
  • 1987 - 1996 Ford F-150 XL 5.8
  • 1987 - 1996 Ford F-150 XL 5.0
  • 1987 - 1996 Ford F-150 XL 4.9
  • 1987 - 1992 Ford F-150 Custom 5.8
  • 1987 - 1992 Ford F-150 Custom 4.9
  • 1987 - 1992 Ford F-150 XLT Lariat 5.0
  • 1987 - 1992 Ford F-150 XLT Lariat 5.8
  • 1987 - 1992 Ford F-150 XLT Lariat 4.9
  • 1987 - 1992 Ford F-150 Custom 5.0
  • 1993 - 1996 Ford F-150 XLT 5.0
  • 1993 - 1996 Ford F-150 XLT 5.8
  • 1993 - 1996 Ford F-150 XLT 4.9
  • 1995 - 1996 Ford F-150 Special 5.0
  • 1995 - 1996 Ford F-150 Eddie Bauer 5.0
  • 1995 - 1996 Ford F-150 Eddie Bauer 5.8
  • 1995 - 1996 Ford F-150 Special 5.8
  • 1995 - 1996 Ford F-150 Special 4.9
  • 1995 - 1996 Ford F-150 Eddie Bauer 4.9

Best Sellers