Description

Eagle 2039375900B7 - 4G63 Stroker 100mm Crankshaft For 7-Bolt (Evo)

4340 CRANK MITSUBISHI 100MM

Forged 4340 Steel Crank - MITSUBISHI 4G63, 3.937" Stroke, 7 BOLT REAR FLANGE.

Eagle forged 4340 steel Cranks feature a non-twist forging, .125" fillet radiuses for superior strength so chamfered / narrowed bearings required, nitrided surface and micropolished. Intended for the most demanding applications.

Balance Type: Internal
Crankshaft Stroke: 3.937 in
Engine Stroke: 3.937
Flywheel Bolt Count: 7
Flywheel Register Diameter: call
Intended Balance: internal
Main Journal: 2.244 in
Material: Forged 4340 Steel
Minimum Rod Length: 5.900 in
Pilot Bore Diameter: call
Rear Seal Diameter: call
Rod Journal Width: 1.05 in
Rod Journal: 1.771 in
Snout Diameter: 1.26 in

Specifications

  • 4340 CRANK MITSUBISHI 100MM
  • Forged 4340 Steel Crank - MITSUBISHI 4G63, 3.937" Stroke, 7 BOLT REAR FLANGE.
  • Eagle forged 4340 steel Cranks feature a non-twist forging, .125" fillet radiuses for superior strength so chamfered / narrowed bearings required, nitrided surface and micropolished. Intended for the most demanding applications.

Eagle 2039375900B7 - 4G63 Stroker 100mm Crankshaft For 7-Bolt (Evo)

4340 CRANK MITSUBISHI 100MM

Forged 4340 Steel Crank - MITSUBISHI 4G63, 3.937" Stroke, 7 BOLT REAR FLANGE.

Eagle forged 4340 steel Cranks feature a non-twist forging, .125" fillet radiuses for superior strength so chamfered / narrowed bearings required, nitrided surface and micropolished. Intended for the most demanding applications.

Balance Type: Internal
Crankshaft Stroke: 3.937 in
Engine Stroke: 3.937
Flywheel Bolt Count: 7
Flywheel Register Diameter: call
Intended Balance: internal
Main Journal: 2.244 in
Material: Forged 4340 Steel
Minimum Rod Length: 5.900 in
Pilot Bore Diameter: call
Rear Seal Diameter: call
Rod Journal Width: 1.05 in
Rod Journal: 1.771 in
Snout Diameter: 1.26 in
  • 4340 CRANK MITSUBISHI 100MM
  • Forged 4340 Steel Crank - MITSUBISHI 4G63, 3.937" Stroke, 7 BOLT REAR FLANGE.
  • Eagle forged 4340 steel Cranks feature a non-twist forging, .125" fillet radiuses for superior strength so chamfered / narrowed bearings required, nitrided surface and micropolished. Intended for the most demanding applications.

Best Sellers