Description

Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. These direct fit transmission cooler kits from Aeroflow are an easy DIY install that comes complete with everything required to fit into your vehicle. They feature a plate and fin cooler made with aluminium construction, which allows for great heat dissipation due to the larger fin surface area. Each cooler kit is pressure tested and rated up to 200psi. It comes complete with our 500 series hose, direct fit brackets and fittings, clamps and hardware.

Specifications

Kit Includes:
1 x Transmission Oil Cooler (Length: 290mm x Width: 280mm x Thickness: 20mm)
1 x Right Hand Side Mounting oil cooler bracket
1 x Left Hand Side Mounting oil cooler bracket
2 x 1 metre length of 500 Series Aeroflow Performance Push Lock Hose
4 x Worm Drive hose clamps
2 x M6 hex Nyloc nuts
2 x M8 hex Nyloc nuts
1 x M6 x 1.00mm Hex Bolt (16mm UHL)
8 x Adhesive cushion foam pads
4 x Nylon mounting zip ties
4 x Nylon locking discs for mounting zip ties
4 x Mounting zip tie springs
1 x Cable tie (5mm x 300mm)
2 x Cushioned P-Clamps (16mm internal diameter)
2 x Block up bungs (M16 x 1.5mm Block off to M8 x 1.25mm Male Stud)
2 x Transmission hose brass adapters (female M16 x 1.5mm to 1/2” hose barb)
1 x Transmission hardline bracket.

Compatibility

  • 2002-2005 Ford Falcon BA

Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs. These direct fit transmission cooler kits from Aeroflow are an easy DIY install that comes complete with everything required to fit into your vehicle. They feature a plate and fin cooler made with aluminium construction, which allows for great heat dissipation due to the larger fin surface area. Each cooler kit is pressure tested and rated up to 200psi. It comes complete with our 500 series hose, direct fit brackets and fittings, clamps and hardware.

Kit Includes:
1 x Transmission Oil Cooler (Length: 290mm x Width: 280mm x Thickness: 20mm)
1 x Right Hand Side Mounting oil cooler bracket
1 x Left Hand Side Mounting oil cooler bracket
2 x 1 metre length of 500 Series Aeroflow Performance Push Lock Hose
4 x Worm Drive hose clamps
2 x M6 hex Nyloc nuts
2 x M8 hex Nyloc nuts
1 x M6 x 1.00mm Hex Bolt (16mm UHL)
8 x Adhesive cushion foam pads
4 x Nylon mounting zip ties
4 x Nylon locking discs for mounting zip ties
4 x Mounting zip tie springs
1 x Cable tie (5mm x 300mm)
2 x Cushioned P-Clamps (16mm internal diameter)
2 x Block up bungs (M16 x 1.5mm Block off to M8 x 1.25mm Male Stud)
2 x Transmission hose brass adapters (female M16 x 1.5mm to 1/2” hose barb)
1 x Transmission hardline bracket.

  • 2002-2005 Ford Falcon BA

Best Sellers