Description

Turbo Oil Drain Adapter With O-Ring Seal.

-10 AN male with 1.5" (38mm) tube with 38-44mm hole centres to suit turbos with 38mm bolt centres on core.

This selection of turbo drains options available from Aeroflow Performance will allow a large range custom plumbing application. For sufficient drainage of oil for both bearing styles of turbochargers a -10AN or 5/8” hose is ideal. The oil outlet should follow the direction of gravity +/-45° when installed in the vehicle on level ground. It is recommended to avoid kinks or beyond 90-degree bends in the oil drain line and draining into the sump below. With heat surrounding the manifold and turbocharger a heat shield or sleeve is a great idea to prolong the life of the hose.

Specifications

  • Width of Bracket - 30mm (1-1/8")
  • Height - 74mm (2-29/32")
  • Length - 95mm (3-3/4")
  • Centre to Centre - 66mm (2-19/32")

Compatibility

  • Universal Part

Turbo Oil Drain Adapter With O-Ring Seal.

-10 AN male with 1.5" (38mm) tube with 38-44mm hole centres to suit turbos with 38mm bolt centres on core.

This selection of turbo drains options available from Aeroflow Performance will allow a large range custom plumbing application. For sufficient drainage of oil for both bearing styles of turbochargers a -10AN or 5/8” hose is ideal. The oil outlet should follow the direction of gravity +/-45° when installed in the vehicle on level ground. It is recommended to avoid kinks or beyond 90-degree bends in the oil drain line and draining into the sump below. With heat surrounding the manifold and turbocharger a heat shield or sleeve is a great idea to prolong the life of the hose.

  • Width of Bracket - 30mm (1-1/8")
  • Height - 74mm (2-29/32")
  • Length - 95mm (3-3/4")
  • Centre to Centre - 66mm (2-19/32")
  • Universal Part

Best Sellers