Description

Enjoy the highest output on today's market with Walbro's new DCSS 39/50 in-tank fuel pump. Able to support an aggressive 700+ horsepower, with a super charger, this innovative dual pumping channel design delivers maximum pressure with superior fuel flow. Operating in both petrol and E85, this fuel pump comes with a check valve to avoid system leak-down and extended cranking at start-up. This superior design results in improved hot fuel flow, as well as minimal noise, increasing efficiency by 20% over conventional pumps, delivering unparalleled performance.

Specifications

  • Fuel: Petrol & E85
  • Highest flow in-tank brushed fuel pump offering from TI Automotive
  • Featuring award winning DCSS technology
  • Horsepower: 900+ at 60PSI (naturally aspirated applications)
  • Flow Rate: 508lph @ 40psi (tested at 13.5 Volts)
  • Directly interchangable with existing Walbro 460lph In-Tank Pumps (F90000267)
  • Fuel: GAS & E85
  • Horsepower: 900+ at 60PSI, naturally aspirated applications
  • Over All Pump Length: 131mm
  • Main Housing Diameter: 39mm
  • Lower Housing Diameter: 50mm
  • Fuel Inlet Diameter: 11mm OD
  • Fuel Outlet Diameter: 11mm OD
  • Flow Rate: 535LPH at 40psi
  • Test Voltage: 13.5 Volts
  • Note: Pump does NOT have a check valve

Compatibility

  • Universal Part

Enjoy the highest output on today's market with Walbro's new DCSS 39/50 in-tank fuel pump. Able to support an aggressive 700+ horsepower, with a super charger, this innovative dual pumping channel design delivers maximum pressure with superior fuel flow. Operating in both petrol and E85, this fuel pump comes with a check valve to avoid system leak-down and extended cranking at start-up. This superior design results in improved hot fuel flow, as well as minimal noise, increasing efficiency by 20% over conventional pumps, delivering unparalleled performance.

  • Fuel: Petrol & E85
  • Highest flow in-tank brushed fuel pump offering from TI Automotive
  • Featuring award winning DCSS technology
  • Horsepower: 900+ at 60PSI (naturally aspirated applications)
  • Flow Rate: 508lph @ 40psi (tested at 13.5 Volts)
  • Directly interchangable with existing Walbro 460lph In-Tank Pumps (F90000267)
  • Fuel: GAS & E85
  • Horsepower: 900+ at 60PSI, naturally aspirated applications
  • Over All Pump Length: 131mm
  • Main Housing Diameter: 39mm
  • Lower Housing Diameter: 50mm
  • Fuel Inlet Diameter: 11mm OD
  • Fuel Outlet Diameter: 11mm OD
  • Flow Rate: 535LPH at 40psi
  • Test Voltage: 13.5 Volts
  • Note: Pump does NOT have a check valve
  • Universal Part

Best Sellers