Description

RC09 is the Project-Mu brake pad of choice for Club Motorsport. 

Be it for circuit racing, time attack, club sprints, tarmac or gravel rally this is the brake pad that offers the very best in performance, feel and release, whilst remaining a budget option.

This pad punches above it's weight and will push aside many other "competition" pads in performance and durability. 

RC09 "Club Racer" is based on the DNA of Project-Mu's ultra successful H16-03 Motorsport pad which is one of the world's best race pads. Club Racer is the pad to use of your car spends a majority of it's time on track or rally stage.

Suitable for, circuit racing, time attack, sprints, gravel and tarmac rally. 

Available in a range of shapes to suit the most popular applications. Japanese, European, Australian OEM calipers. Evo, STI, HSV or FPV right through to Golf GTI or Porsche GT3. A range of Motorsport shapes are also available to suit AP, Alcon, Brembo, Wilwood etc

 

RC09 Club Racer Brake Features

Fade Resistance

When brake pads operate at high temperatures, high pressure gases can be created in the pad and can cause a 'gas layer' between the pad and rotor. This can make the driver feel like the brakes have lost performance as the brake pedal feels the same, but the car won't slow down as normal. This phenomenon is known as 'fade'. A slot is manufactured in all Project-Mu pads to offer the gases an escape route. 
※ Rotor slots also assist to provide the same solution.

Noise Suppression

Brake pads manufactured without a chamfer on the leading edge of the friction material, are more likely to produce unpleasant noise. This noise known as brake squeal is actually a high frequency vibration created by the friction between pad and rotor. The vibration can manifest in caliper, rotor or suspension vibration. This 'problem' is reduced or eliminated by the chamfer on the pad material. 
※ Brake squeal is more likely to occur in some models, and not others. It can also depend on the condition of the car.

Heat Treatment

Project-Mu brake pads are subjected to heat treatment as part of the manufacturing process. This process 'burns out' unwanted materials in advance, reducing the gases that can cause fade. As a result, Project-Mu brake pads only need light 'bedding in' to match the pad to your rotor surface.

Brake Pad Structural Stability

Brake pads are subjected to huge pressure from caliper pistons in unequal proportions across the pad. Brake pads must remain flat to offer optimal performance so Project-Mu use only the highest grade quality steel at the correct thickness to ensure this stability. Project-Mu pads are up to 20% stronger than some competitors.

Specifications

Compatibility

  • 2001 - 2007 Subaru WRX Wagon (GG)
  • 2001 - 2007 Subaru WRX Sedan (GD)
  • 199 - 2002 Nissan Skyline R34 GTS-T
  • 1995 - 1998 Nissan Skyline R33 GTS-T
  • 1989 - 1994 Nissan Skyline R32 GTS-T
  • 1989 - 1994 Nissan Skyline R32 GTR

RC09 is the Project-Mu brake pad of choice for Club Motorsport. 

Be it for circuit racing, time attack, club sprints, tarmac or gravel rally this is the brake pad that offers the very best in performance, feel and release, whilst remaining a budget option.

This pad punches above it's weight and will push aside many other "competition" pads in performance and durability. 

RC09 "Club Racer" is based on the DNA of Project-Mu's ultra successful H16-03 Motorsport pad which is one of the world's best race pads. Club Racer is the pad to use of your car spends a majority of it's time on track or rally stage.

Suitable for, circuit racing, time attack, sprints, gravel and tarmac rally. 

Available in a range of shapes to suit the most popular applications. Japanese, European, Australian OEM calipers. Evo, STI, HSV or FPV right through to Golf GTI or Porsche GT3. A range of Motorsport shapes are also available to suit AP, Alcon, Brembo, Wilwood etc

 

RC09 Club Racer Brake Features

Fade Resistance

When brake pads operate at high temperatures, high pressure gases can be created in the pad and can cause a 'gas layer' between the pad and rotor. This can make the driver feel like the brakes have lost performance as the brake pedal feels the same, but the car won't slow down as normal. This phenomenon is known as 'fade'. A slot is manufactured in all Project-Mu pads to offer the gases an escape route. 
※ Rotor slots also assist to provide the same solution.

Noise Suppression

Brake pads manufactured without a chamfer on the leading edge of the friction material, are more likely to produce unpleasant noise. This noise known as brake squeal is actually a high frequency vibration created by the friction between pad and rotor. The vibration can manifest in caliper, rotor or suspension vibration. This 'problem' is reduced or eliminated by the chamfer on the pad material. 
※ Brake squeal is more likely to occur in some models, and not others. It can also depend on the condition of the car.

Heat Treatment

Project-Mu brake pads are subjected to heat treatment as part of the manufacturing process. This process 'burns out' unwanted materials in advance, reducing the gases that can cause fade. As a result, Project-Mu brake pads only need light 'bedding in' to match the pad to your rotor surface.

Brake Pad Structural Stability

Brake pads are subjected to huge pressure from caliper pistons in unequal proportions across the pad. Brake pads must remain flat to offer optimal performance so Project-Mu use only the highest grade quality steel at the correct thickness to ensure this stability. Project-Mu pads are up to 20% stronger than some competitors.

  • 2001 - 2007 Subaru WRX Wagon (GG)
  • 2001 - 2007 Subaru WRX Sedan (GD)
  • 199 - 2002 Nissan Skyline R34 GTS-T
  • 1995 - 1998 Nissan Skyline R33 GTS-T
  • 1989 - 1994 Nissan Skyline R32 GTS-T
  • 1989 - 1994 Nissan Skyline R32 GTR

Best Sellers