Description

The ZR-4 Gauge works with Zeitronix Zt-4 Wideband AFR meter It also can be used with Zt-2 and Zt-3 combo for dual channel AFR read out. The ZR-4 Gauge plugs into the Zt-4 or Zt-2 DATA port and can be used while data logging.
 
Clean and easy plug and play installation: power and display information is provided using one wire connecting to the Zt-4 GAUGE / DATA port. The ZR-4 cable length is 5 ft (1.5m) and can be extended if needed.

The ZR-4 gauge is only 6/8" (19mm) thick. The back of the gauge is completely flat with cable hidden in a cavity and can be surface mounted almost anywhere inside the car cabin using a piece of Velcro or double sided tape. The ZR-4 base allows the gauge to be mounted in a standard 2” 1/16 (52mm) gauge pod. For additional mounting options the package includes 2 set screws and 2 nuts (4-40 screw size). 

Specifications

  • Display Colour: Red
  • Left and Right exhaust bank shown on a single gauge side by side.
  • Stylish, machined, brushed aluminum bezel and slim enclosure
  • High contrast LED display
  • Large 0.2"" (5mm) digits - available in Red or Yellow
  • Slim design for flexible gauge mounting options
  • Left and Right Bank AFR read out from the Zt-4 Dual AFR Wideband controller or Zt-2+Zt-3 combo
  • Base diameter: 2"" 1/16 (52mm)
  • Bezel diameter: 2"" 1/2 (62mm)
  • Thickness: 0.75"" (19mm)
  • Digit height: 0.4"" (10mm)

What's Included

  • (1) ZR-4 Gauge Only

Compatibility

  • Universal Part

The ZR-4 Gauge works with Zeitronix Zt-4 Wideband AFR meter It also can be used with Zt-2 and Zt-3 combo for dual channel AFR read out. The ZR-4 Gauge plugs into the Zt-4 or Zt-2 DATA port and can be used while data logging.
 
Clean and easy plug and play installation: power and display information is provided using one wire connecting to the Zt-4 GAUGE / DATA port. The ZR-4 cable length is 5 ft (1.5m) and can be extended if needed.

The ZR-4 gauge is only 6/8" (19mm) thick. The back of the gauge is completely flat with cable hidden in a cavity and can be surface mounted almost anywhere inside the car cabin using a piece of Velcro or double sided tape. The ZR-4 base allows the gauge to be mounted in a standard 2” 1/16 (52mm) gauge pod. For additional mounting options the package includes 2 set screws and 2 nuts (4-40 screw size). 

  • Display Colour: Red
  • Left and Right exhaust bank shown on a single gauge side by side.
  • Stylish, machined, brushed aluminum bezel and slim enclosure
  • High contrast LED display
  • Large 0.2"" (5mm) digits - available in Red or Yellow
  • Slim design for flexible gauge mounting options
  • Left and Right Bank AFR read out from the Zt-4 Dual AFR Wideband controller or Zt-2+Zt-3 combo
  • Base diameter: 2"" 1/16 (52mm)
  • Bezel diameter: 2"" 1/2 (62mm)
  • Thickness: 0.75"" (19mm)
  • Digit height: 0.4"" (10mm)
  • (1) ZR-4 Gauge Only
  • Universal Part

Best Sellers