Description

Anti-Inversion Extended shackles are made with 18mm pins for the Front or Rear of all models.

Superior Engineering shackles feature an anti-inversion design to stop the springs being damaged when the shackles are hit into obstacles.

NOTE: 3-degree caster wedges should also be purchased and fitted in the front when using extended shackles.

Extended shackles have 2 purposes, one is to give you more height and the other is to assist in wheel travel. The longer a shackle is the more wheel travel you will get, dependent on such factors as spring design and shock length.

Superior Engineering Extended shackles come with Greasable High Tensile Pins that are Case Hardened, they are coated in a 7 part process SA5 Anti-Corrosion Zinc finish, approx 2 inch over standard in height and the pins are pressed and welded to create the strongest extended shackle on the market!

One other major benefit of a Superior Engineering Shackle is you don't need to purchase special size bushes as we have retained the factory size pins so you standard bushes will fit them and you can source your bushes from anywhere.

Superior Engineering is the only Company that incorporates the welded pins into our design and this totally stops any sideways flexing that ultimately will lead to the shackle failure and premature wear of the shackle plates and they also incorporate the 'Step Bolt' design so the shackles can be properly tightened to ensure the exact tolerance between the bushes in maintained.

Front and rear shackles are the same.

Sold as a pair (one end of a vehicle, eg either front or rear).

Specifications

Compatibility

  • Toyota LandCruiser 40/45 Series
Anti-Inversion Extended shackles are made with 18mm pins for the Front or Rear of all models.

Superior Engineering shackles feature an anti-inversion design to stop the springs being damaged when the shackles are hit into obstacles.

NOTE: 3-degree caster wedges should also be purchased and fitted in the front when using extended shackles.

Extended shackles have 2 purposes, one is to give you more height and the other is to assist in wheel travel. The longer a shackle is the more wheel travel you will get, dependent on such factors as spring design and shock length.

Superior Engineering Extended shackles come with Greasable High Tensile Pins that are Case Hardened, they are coated in a 7 part process SA5 Anti-Corrosion Zinc finish, approx 2 inch over standard in height and the pins are pressed and welded to create the strongest extended shackle on the market!

One other major benefit of a Superior Engineering Shackle is you don't need to purchase special size bushes as we have retained the factory size pins so you standard bushes will fit them and you can source your bushes from anywhere.

Superior Engineering is the only Company that incorporates the welded pins into our design and this totally stops any sideways flexing that ultimately will lead to the shackle failure and premature wear of the shackle plates and they also incorporate the 'Step Bolt' design so the shackles can be properly tightened to ensure the exact tolerance between the bushes in maintained.

Front and rear shackles are the same.

Sold as a pair (one end of a vehicle, eg either front or rear).
  • Toyota LandCruiser 40/45 Series

Best Sellers