Description

Project-Mu NS-EP street pads are developed specifically for street use. Guaranteed to outperform OEM pads, NS-EP pads are a reliable and simple way to upgrade your braking performance for minimal cost. NS-EP pads offer a well balanced improvement over the performance of genuine brake pads. NS-EP street pads give outstanding initial stopping power. Made from Asbestos-free brake compounds, NS-EP street pads have excellent low dust and squeal properties.

 

Fade Resistance

When brake pads operate at high temperatures, high pressure gases can be created in the pad and can cause a 'gas layer' between the pad and rotor. This can make the driver feel like the brakes have lost performance as the brake pedal feels the same, but the car won't slow down as normal. This phenomenon is known as 'fade'. A slot is manufactured in all Project-Mu pads to offer the gases an escape route. Rotor slots also assist to provide the same solution.

Noise Suppression

Brake pads manufactured without a chamfer on the leading edge of the friction material, are more likely to produce unpleasant noise. This noise known as brake squeal is actually a high frequency vibration created by the friction between pad and rotor. The vibration can manifest in caliper, rotor or suspension vibration. This 'problem' is reduced or eliminated by the chamfer on the pad material. Brake squeal is more likely to occur in some models, and not others. It can also depend on the condition of the car.

Heat Treatment

Project-Mu brake pads are subjected to heat treatment as part of the manufacturing process. This process 'burns out' unwanted materials in advance, reducing the gases that can cause fade. As a result, Project-Mu brake pads only need light 'bedding in' to match the pad to your rotor surface.

Brake Pad Structural Stability

Brake pads are subjected to huge pressure from caliper pistons in unequal proportions across the pad. Brake pads must remain flat to offer optimal performance so Project-Mu use only the highest grade quality steel at the correct thickness to ensure this stability. Project-Mu pads are up to 20% stronger than some competitors.

Specifications

  • Compound: NS-EP
  • Temperature Range: 0 - 400 DegC
  • Friction Coefficient: 0.35 - 0.40
  • Pad Dimensions (mm): (L) 108.5 x (W) 41.6 x (H) 13.7
  • Pad Set Weight (kg): 1

What's Included

  • LH Inner + RH Inner + 2 Outer Pads

Compatibility

  • 1994-2000 Subaru WRX GC8/GF8 (1-Pot Sliding Caliper)
  • 1994-2000 Subaru STI GC8 (1-Pot Sliding Caliper)
  • 1997-2002 Subaru Forester SF (Inc GT - 1-Pot Sliding Caliper)
  • 1994-2000 Subaru Impreza GC8/GF8 (1-Pot Sliding Caliper)
  • 2001-2007 Subaru Impreza GD/GG (1-Pot Sliding Caliper)
  • 1998-2003 Subaru Liberty BE/BH (1-Pot Sliding Caliper)
  • 2004-2009 Subaru Liberty BL/BP (1-Pot Sliding Caliper)

Project-Mu NS-EP street pads are developed specifically for street use. Guaranteed to outperform OEM pads, NS-EP pads are a reliable and simple way to upgrade your braking performance for minimal cost. NS-EP pads offer a well balanced improvement over the performance of genuine brake pads. NS-EP street pads give outstanding initial stopping power. Made from Asbestos-free brake compounds, NS-EP street pads have excellent low dust and squeal properties.

 

Fade Resistance

When brake pads operate at high temperatures, high pressure gases can be created in the pad and can cause a 'gas layer' between the pad and rotor. This can make the driver feel like the brakes have lost performance as the brake pedal feels the same, but the car won't slow down as normal. This phenomenon is known as 'fade'. A slot is manufactured in all Project-Mu pads to offer the gases an escape route. Rotor slots also assist to provide the same solution.

Noise Suppression

Brake pads manufactured without a chamfer on the leading edge of the friction material, are more likely to produce unpleasant noise. This noise known as brake squeal is actually a high frequency vibration created by the friction between pad and rotor. The vibration can manifest in caliper, rotor or suspension vibration. This 'problem' is reduced or eliminated by the chamfer on the pad material. Brake squeal is more likely to occur in some models, and not others. It can also depend on the condition of the car.

Heat Treatment

Project-Mu brake pads are subjected to heat treatment as part of the manufacturing process. This process 'burns out' unwanted materials in advance, reducing the gases that can cause fade. As a result, Project-Mu brake pads only need light 'bedding in' to match the pad to your rotor surface.

Brake Pad Structural Stability

Brake pads are subjected to huge pressure from caliper pistons in unequal proportions across the pad. Brake pads must remain flat to offer optimal performance so Project-Mu use only the highest grade quality steel at the correct thickness to ensure this stability. Project-Mu pads are up to 20% stronger than some competitors.

  • Compound: NS-EP
  • Temperature Range: 0 - 400 DegC
  • Friction Coefficient: 0.35 - 0.40
  • Pad Dimensions (mm): (L) 108.5 x (W) 41.6 x (H) 13.7
  • Pad Set Weight (kg): 1
  • LH Inner + RH Inner + 2 Outer Pads
  • 1994-2000 Subaru WRX GC8/GF8 (1-Pot Sliding Caliper)
  • 1994-2000 Subaru STI GC8 (1-Pot Sliding Caliper)
  • 1997-2002 Subaru Forester SF (Inc GT - 1-Pot Sliding Caliper)
  • 1994-2000 Subaru Impreza GC8/GF8 (1-Pot Sliding Caliper)
  • 2001-2007 Subaru Impreza GD/GG (1-Pot Sliding Caliper)
  • 1998-2003 Subaru Liberty BE/BH (1-Pot Sliding Caliper)
  • 2004-2009 Subaru Liberty BL/BP (1-Pot Sliding Caliper)

Best Sellers