Description

The mountune carbon induction kit for Mk8 Fiesta ST (pre- and post-facelift) and Puma ST includes a beautifully designed high-flow carbon fibre assembly, which, combined with its natural heat-resistant properties and the large dual entry air filter, provides virtually uncompromised airflow to the 3-cylinder Dragon engine.

Choose between an aluminium or our stunning carbon fibre cold air feed - both utilise the cold air being fed from the factory cross-car air duct.

In addition to this feed, the kit also includes a porous lower hose which mounts to a lower cold air entry point in the bottom of the heat shield - a design feature originally developed and utilised by mountune on Ford-endorsed intakes over the last decade and a half.

This can either be mounted behind the bumper in a low-pressure area, or for the ultimate setup, this can be fed by cold air directly from the front of the car via our Auxiliary Cold Air Intake (an updated version for Puma owners is in development).

The mountune carbon assembly is fully rubber mounted to provide compliance to the native engine movement, preventing unwanted interference or rubbing and is supplied with a comprehensive selection of installation hardware for hassle-free fitting.

Back-to-back testing against our enclosed induction kit showed peak power gains of up to 7bhp and 10Nm on vehicles running a higher power output, although this induction kit is also fully compatible with standard vehicles.

Engineered to deliver the ultimate performance and sound upgrade for owners of Mk8 Fiesta ST pre-facelift, Mk8.5 Fiesta ST post-facelift and Puma ST models.

Please note: as carbon fibre uses a man-made manufacturing process, small differences in the finish of parts is normal.

Specifications

  • Matt carbon fibre air filter assembly
  • mountune high-flow dual entry cone air filter
  • Aluminium / carbon fibre cold air feed options
  • Porous secondary cold air feed (protects against hydrolocking)
  • Stainless hose clamp
  • Supplied with all required hardware
  • Suitable for vehicles at all stages of tune - recommended for vehicles running 260PS / 365Nm and above
  • Recommended to be used with the mountune high-flow induction hose

Compatibility

  • Ford Puma ST 2020+
  • Ford Fiesta ST Mk8 2018+

The mountune carbon induction kit for Mk8 Fiesta ST (pre- and post-facelift) and Puma ST includes a beautifully designed high-flow carbon fibre assembly, which, combined with its natural heat-resistant properties and the large dual entry air filter, provides virtually uncompromised airflow to the 3-cylinder Dragon engine.

Choose between an aluminium or our stunning carbon fibre cold air feed - both utilise the cold air being fed from the factory cross-car air duct.

In addition to this feed, the kit also includes a porous lower hose which mounts to a lower cold air entry point in the bottom of the heat shield - a design feature originally developed and utilised by mountune on Ford-endorsed intakes over the last decade and a half.

This can either be mounted behind the bumper in a low-pressure area, or for the ultimate setup, this can be fed by cold air directly from the front of the car via our Auxiliary Cold Air Intake (an updated version for Puma owners is in development).

The mountune carbon assembly is fully rubber mounted to provide compliance to the native engine movement, preventing unwanted interference or rubbing and is supplied with a comprehensive selection of installation hardware for hassle-free fitting.

Back-to-back testing against our enclosed induction kit showed peak power gains of up to 7bhp and 10Nm on vehicles running a higher power output, although this induction kit is also fully compatible with standard vehicles.

Engineered to deliver the ultimate performance and sound upgrade for owners of Mk8 Fiesta ST pre-facelift, Mk8.5 Fiesta ST post-facelift and Puma ST models.

Please note: as carbon fibre uses a man-made manufacturing process, small differences in the finish of parts is normal.

  • Matt carbon fibre air filter assembly
  • mountune high-flow dual entry cone air filter
  • Aluminium / carbon fibre cold air feed options
  • Porous secondary cold air feed (protects against hydrolocking)
  • Stainless hose clamp
  • Supplied with all required hardware
  • Suitable for vehicles at all stages of tune - recommended for vehicles running 260PS / 365Nm and above
  • Recommended to be used with the mountune high-flow induction hose
  • Ford Puma ST 2020+
  • Ford Fiesta ST Mk8 2018+

Best Sellers