Description

DBA’s Xtreme Performance brake pads have been designed for drivers seeking high initial bite and friction consistency from low to high temperatures. The XP range are for heavy duty applications, where higher friction levels are required, in order to safely brake under extreme conditions.

DBA recommends Xtreme Performance brake pads for street performance and police pursuit vehicles, as well as club track days, heavy towing and upgraded 4WD’s.

DBA recommends T3 slotted rotors in the 4000 & 5000 Series for best stopping performance.

DBA Street Performance part numbers are denoted by the suffix (XP).

DBA’s range of Performance brake pads have been designed at the forefront of technology and quality standards. DBA has utilised a range of cutting edge features including:

1. Chamfer – Reduces noise, vibration and harshness*
2. Slot – Facilitate temperature stability
3. Premium Quality Shim – Dual layer elastomeric coated shim
4. Scorching Process (TSP) – Raises cold friction effectiveness and reduces bedding-in time
5. Backing Plate – G3131 steel – dimensionally stable and wear resistant
6. Electronic Wear Sensor – OE replacement wear sensor**

Note: Brake Pad / Calliper Hardware included where applicable.
**Electronic wear sensors included where applicable
**Where applicable

All DBA Performance brake pads are scorched on the friction surface to improve the bedding in process and minimise the onset of green fade typically experienced with new pads. Thermal Stability Profiling (TSP), a process unique to DBA, increases cold friction effectiveness and reduces bedding-in time.

The Performance pads include chamfers where required to reduce unwanted noise, vibration and harshness under braking while the centre slot facilitates temperature stability. DBA’s brake pad backing plates are made from high quality steel that is resistant to wear.

DBA also uses high quality European made, triple layer shims to enhance the pad noise dampening characteristics (included in all products).

Of course, these pads are asbestos free with no other nasty materials while at the same time keeping dust to a minimum and are gentle on wheels, with no sticky goo to scrub off.

As with all DBA products, the Performance pad range is backed up with full technical support both online and in the field

Specifications

  • Semi-metallic, carbon fibre friction material
  • G-G Class Friction (0.45 average mu from low to high temperatures)
  • Excellent high temperature performance
  • Optimal braking consistency up to 550ºC (1022ºF)

What's Included

  1. DBA High Performance Brake Pads (front or rear axle set).
  2. Electronic wear sensors**
  3. DBA high temperature brake pad lubricant
  4. Brake disc and pad fitment and service reminder – door jam sticker
  5. Bed in procedure card

Note: Brake Pad / Calliper Hardware included where applicable.
**Electronic wear sensors included where applicable
**Where applicable

 

Compatibility

Please confirm pad shape by comparing existing pad against the blueprint in the second photo.

  • 1999-2000 Subaru WRX GC8 (4-Piston)
  • 2001-2007 Subaru WRX GD (4-Piston)
  • 2003-2007 Subaru Forester SG (4-Piston)**
  • R32 Nissan Skyline (4-Piston)
  • R33 Nissan Skyline (4-Piston)
  • R34 Nissan Skyline (4-Piston)
  • S14 Nissan 200SX (4-Piston)
  • S15 Nissan 200SX (4-Piston)

**SG Forester has two possible calipers either 4-Piston DB1170 or 2-Piston DB1491. Check pad shapes to confirm correct pad for your model.

DBA’s Xtreme Performance brake pads have been designed for drivers seeking high initial bite and friction consistency from low to high temperatures. The XP range are for heavy duty applications, where higher friction levels are required, in order to safely brake under extreme conditions.

DBA recommends Xtreme Performance brake pads for street performance and police pursuit vehicles, as well as club track days, heavy towing and upgraded 4WD’s.

DBA recommends T3 slotted rotors in the 4000 & 5000 Series for best stopping performance.

DBA Street Performance part numbers are denoted by the suffix (XP).

DBA’s range of Performance brake pads have been designed at the forefront of technology and quality standards. DBA has utilised a range of cutting edge features including:

1. Chamfer – Reduces noise, vibration and harshness*
2. Slot – Facilitate temperature stability
3. Premium Quality Shim – Dual layer elastomeric coated shim
4. Scorching Process (TSP) – Raises cold friction effectiveness and reduces bedding-in time
5. Backing Plate – G3131 steel – dimensionally stable and wear resistant
6. Electronic Wear Sensor – OE replacement wear sensor**

Note: Brake Pad / Calliper Hardware included where applicable.
**Electronic wear sensors included where applicable
**Where applicable

All DBA Performance brake pads are scorched on the friction surface to improve the bedding in process and minimise the onset of green fade typically experienced with new pads. Thermal Stability Profiling (TSP), a process unique to DBA, increases cold friction effectiveness and reduces bedding-in time.

The Performance pads include chamfers where required to reduce unwanted noise, vibration and harshness under braking while the centre slot facilitates temperature stability. DBA’s brake pad backing plates are made from high quality steel that is resistant to wear.

DBA also uses high quality European made, triple layer shims to enhance the pad noise dampening characteristics (included in all products).

Of course, these pads are asbestos free with no other nasty materials while at the same time keeping dust to a minimum and are gentle on wheels, with no sticky goo to scrub off.

As with all DBA products, the Performance pad range is backed up with full technical support both online and in the field

  • Semi-metallic, carbon fibre friction material
  • G-G Class Friction (0.45 average mu from low to high temperatures)
  • Excellent high temperature performance
  • Optimal braking consistency up to 550ºC (1022ºF)
  1. DBA High Performance Brake Pads (front or rear axle set).
  2. Electronic wear sensors**
  3. DBA high temperature brake pad lubricant
  4. Brake disc and pad fitment and service reminder – door jam sticker
  5. Bed in procedure card

Note: Brake Pad / Calliper Hardware included where applicable.
**Electronic wear sensors included where applicable
**Where applicable

 

Please confirm pad shape by comparing existing pad against the blueprint in the second photo.

  • 1999-2000 Subaru WRX GC8 (4-Piston)
  • 2001-2007 Subaru WRX GD (4-Piston)
  • 2003-2007 Subaru Forester SG (4-Piston)**
  • R32 Nissan Skyline (4-Piston)
  • R33 Nissan Skyline (4-Piston)
  • R34 Nissan Skyline (4-Piston)
  • S14 Nissan 200SX (4-Piston)
  • S15 Nissan 200SX (4-Piston)

**SG Forester has two possible calipers either 4-Piston DB1170 or 2-Piston DB1491. Check pad shapes to confirm correct pad for your model.

Best Sellers