Description

Standard with 60psi max boost operating pressure! Turbosmart e-Boost2 is a second generation complete Boost Management System. With market-leading features and and state-of-the-art software, e-Boost2 is the one accessory all owners of turbocharged cars should have! Easy to use, yet sophisticated and technologically advanced, the e-Boost2 is equally at home in a street-going vehicle as it is in a top-level racecar. e-Boost2 allows the user to control, monitor, map and compensate boost. But e-Boost2 is a lot more than just a boost controller - it can also control water spray, methanol or nitrous injection, manage shift/warning lights and read/monitor RPM.

Specifications

e-Boost2 allows the user to control, monitor, map and compensate boost. But e-Boost2 is a lot more than just a boost controller – it can also control water spray, methanol or nitrous injection, manage shift/warning lights and read/monitor RPM. While e-Boost2 is fitted with a state-of-the art software, it has been designed to be easy and logical to use.

  • Boost Levels: up to 6 levels of boost.
  • Boost on Demand: provides instant overtaking power at your fingertips
  • Gear-based Mapping: set a different boost for each gear!
  • Adjustable Boost Levels: program boost against TIME or RPM.
  • Aux Output: fully programmable; controls water spray, methanol or nitrous injection.
  • RPM Compensation: eliminates boost drop-off at high RPM.
  • Peak Hold/Max Boost Recall: monitors boost and RPM.
  • Gate Pressure: eliminates wastegate creep.
  • Overboost Shutdown: provides added protection for your engine .
  • Display: programmable, can be configured to KPA, Bar or PSI.
  • Auto Dimming: with backlit buttons for hassle free navigation.

What's Included

  • (1) e-Boost 2 Head Unit - Boost Controller
  • (6ft) 4mm Poly Tube - Connecting vacuum/pressure to e-Boost head unit
  • (6ft) 3mm Silicon Vacuum Tube - Connecting vacuum/pressure to e-Boost head unit
  • (6ft) 5mm Silicon Vacuum Tube - Connecting pressure source to solenoid and actuator
  • (1) 8 pin Wiring Loom
  • (1) 3 port Solenoid - For controlling air pressure to wastegate actuator
  • (3) 1/8 NPT Pressure Nipples - For connecting pressure lines to the solenoid
  • (1) Fuse Holder with 5amp Fuse - For connecting power to e-Boost loom
  • (1) 5/32 Hose Tee Piece - Splicing existing vacuum line for signal to e-Boost head unit
  • (2) 1/4 - 3/16 Hose Reducer - Conneting 3mm-5mm vacuum tube
  • (1) Poly Tube - 3mm Joiner - Connecting 4mm poly tube to 3mm silicon vacuum tube
  • (1) Solenoid Mounting Bracket - For mounting solenoid to chassis
  • (2) M3x20 Socket Head Screws - For mounting the solenoid to the bracket
  • (1) Panel Mount Bracket - Mounting e-Boost head unit to a panel
  • (1) M6x20 Grub Screw - For panel mount bracket
  • (1) M6 Half Nut - For panel mount bracket
  • (1) M6 Washer - For panel mount bracket
  • (4) 3mm Spring Clamps - For securing 3mm vacuum hose to fittings
  • (6) 5mm Spring Clamps - For securing 5mm vacuum hose to fittings
  • (1) 6mm Crimp on Connector - For securing the ground wire to the chassis
  • (1) 100mm Heat Shrink - For insulating joined wires
  • (10) 100mm Cable Ties - For securing hoses and lines
  • (1.8m) 2 Core Cable - For conneting the wiring loom to solenoid
  • (2) M6x25mm Socket Head Screw - Mounting the solenoid bracket to chassis
  • (2) M6 Nyloc Nuts - Securing solenoid bracket to chassis

Compatibility

  • Universal (Turbo)

Standard with 60psi max boost operating pressure! Turbosmart e-Boost2 is a second generation complete Boost Management System. With market-leading features and and state-of-the-art software, e-Boost2 is the one accessory all owners of turbocharged cars should have! Easy to use, yet sophisticated and technologically advanced, the e-Boost2 is equally at home in a street-going vehicle as it is in a top-level racecar. e-Boost2 allows the user to control, monitor, map and compensate boost. But e-Boost2 is a lot more than just a boost controller - it can also control water spray, methanol or nitrous injection, manage shift/warning lights and read/monitor RPM.

e-Boost2 allows the user to control, monitor, map and compensate boost. But e-Boost2 is a lot more than just a boost controller – it can also control water spray, methanol or nitrous injection, manage shift/warning lights and read/monitor RPM. While e-Boost2 is fitted with a state-of-the art software, it has been designed to be easy and logical to use.

  • Boost Levels: up to 6 levels of boost.
  • Boost on Demand: provides instant overtaking power at your fingertips
  • Gear-based Mapping: set a different boost for each gear!
  • Adjustable Boost Levels: program boost against TIME or RPM.
  • Aux Output: fully programmable; controls water spray, methanol or nitrous injection.
  • RPM Compensation: eliminates boost drop-off at high RPM.
  • Peak Hold/Max Boost Recall: monitors boost and RPM.
  • Gate Pressure: eliminates wastegate creep.
  • Overboost Shutdown: provides added protection for your engine .
  • Display: programmable, can be configured to KPA, Bar or PSI.
  • Auto Dimming: with backlit buttons for hassle free navigation.
  • (1) e-Boost 2 Head Unit - Boost Controller
  • (6ft) 4mm Poly Tube - Connecting vacuum/pressure to e-Boost head unit
  • (6ft) 3mm Silicon Vacuum Tube - Connecting vacuum/pressure to e-Boost head unit
  • (6ft) 5mm Silicon Vacuum Tube - Connecting pressure source to solenoid and actuator
  • (1) 8 pin Wiring Loom
  • (1) 3 port Solenoid - For controlling air pressure to wastegate actuator
  • (3) 1/8 NPT Pressure Nipples - For connecting pressure lines to the solenoid
  • (1) Fuse Holder with 5amp Fuse - For connecting power to e-Boost loom
  • (1) 5/32 Hose Tee Piece - Splicing existing vacuum line for signal to e-Boost head unit
  • (2) 1/4 - 3/16 Hose Reducer - Conneting 3mm-5mm vacuum tube
  • (1) Poly Tube - 3mm Joiner - Connecting 4mm poly tube to 3mm silicon vacuum tube
  • (1) Solenoid Mounting Bracket - For mounting solenoid to chassis
  • (2) M3x20 Socket Head Screws - For mounting the solenoid to the bracket
  • (1) Panel Mount Bracket - Mounting e-Boost head unit to a panel
  • (1) M6x20 Grub Screw - For panel mount bracket
  • (1) M6 Half Nut - For panel mount bracket
  • (1) M6 Washer - For panel mount bracket
  • (4) 3mm Spring Clamps - For securing 3mm vacuum hose to fittings
  • (6) 5mm Spring Clamps - For securing 5mm vacuum hose to fittings
  • (1) 6mm Crimp on Connector - For securing the ground wire to the chassis
  • (1) 100mm Heat Shrink - For insulating joined wires
  • (10) 100mm Cable Ties - For securing hoses and lines
  • (1.8m) 2 Core Cable - For conneting the wiring loom to solenoid
  • (2) M6x25mm Socket Head Screw - Mounting the solenoid bracket to chassis
  • (2) M6 Nyloc Nuts - Securing solenoid bracket to chassis
  • Universal (Turbo)

Best Sellers