Description

These Kinugawa TD05H-18G turbos are a bolt on replacement for the TD04 and VF-Series single-scroll turbo found on the 2008-2014 WRX, 2008-2012 Forester XT and 2007-2009 Liberty GT with EJ25. Available with either cast or billet compressor wheels, 7 or 8cm turbine housings and 9-blade or 12-blade turbine wheels.

Supplied with generic Subaru fitting kit including replacement Subaru fitment gaskets, studs, nuts and bolts (where required), as well as oil and water lines with fittings. Oil/water lines are not vehicle specific and may require modification or additional components for installation.

Specifications

  • Compressor Wheel (Inducer/Exducer): 50.5 / 68mm (18G)
  • Turbine Wheel (Inducer/Exducer): 49.1 / 56 mm (TD05H)
  • Finish: Standard
  • Turbine Blade: 9 Blade
  • Turbine Housing: 7cm
  • Turbine Inlet: for Subaru single scroll type
  • Turbine Outlet: for Subaru single scroll type
  • Compressor Inlet: Stock 2.4
  • Max Hp: 280~350 HP
  • Boost limited: 2.8Bar
  • Suggested boost: 1.5Bar
  • Cooling System: Oil and water cooled
  • Bearing: Journal bearing system (performance thrust bearing kit)
  • Actuator Pressure: 1.0Bar/14.7psi Default (0.5, 0.8, 1.0, 1.2, 1.5, 1.7, 2.0 Bar pressures available, specify in shipping comments)
  • Generic Subaru fitting kit supplied

What's Included

  • Gaskets
  • Studs
  • Nuts
  • Bolts
  • Water Lines
  • Oil Lines
  • Fittings

Compatibility

  • 2008-2014 Subaru WRX (GE/GJ/GP)
  • 2007-2009 Subaru Liberty GT (BL/BP)
  • 2008-2012 Subaru Forester XT (SH)

These Kinugawa TD05H-18G turbos are a bolt on replacement for the TD04 and VF-Series single-scroll turbo found on the 2008-2014 WRX, 2008-2012 Forester XT and 2007-2009 Liberty GT with EJ25. Available with either cast or billet compressor wheels, 7 or 8cm turbine housings and 9-blade or 12-blade turbine wheels.

Supplied with generic Subaru fitting kit including replacement Subaru fitment gaskets, studs, nuts and bolts (where required), as well as oil and water lines with fittings. Oil/water lines are not vehicle specific and may require modification or additional components for installation.

  • Compressor Wheel (Inducer/Exducer): 50.5 / 68mm (18G)
  • Turbine Wheel (Inducer/Exducer): 49.1 / 56 mm (TD05H)
  • Finish: Standard
  • Turbine Blade: 9 Blade
  • Turbine Housing: 7cm
  • Turbine Inlet: for Subaru single scroll type
  • Turbine Outlet: for Subaru single scroll type
  • Compressor Inlet: Stock 2.4
  • Max Hp: 280~350 HP
  • Boost limited: 2.8Bar
  • Suggested boost: 1.5Bar
  • Cooling System: Oil and water cooled
  • Bearing: Journal bearing system (performance thrust bearing kit)
  • Actuator Pressure: 1.0Bar/14.7psi Default (0.5, 0.8, 1.0, 1.2, 1.5, 1.7, 2.0 Bar pressures available, specify in shipping comments)
  • Generic Subaru fitting kit supplied
  • Gaskets
  • Studs
  • Nuts
  • Bolts
  • Water Lines
  • Oil Lines
  • Fittings
  • 2008-2014 Subaru WRX (GE/GJ/GP)
  • 2007-2009 Subaru Liberty GT (BL/BP)
  • 2008-2012 Subaru Forester XT (SH)

Best Sellers