Description

MAZDA RX2 / Capella 1970-1978 XYZ Racing Super Sport Coilovers - Black Top Mount - MARX2-SS_BLK

XYZ Racing's early Mazda RX2 / Capella coilover system is a full performance upgrade designed here in Australia by Performance Suspension. Using XYZ Racing technology it features both spring and body adjustment meaning spring pre-load or working suspension travel can be optimized via the spring seat, while final height adjustment is done via the lower mount.

Shock unit is the XYZ Racing performance Mono-Tube shock with a 45mm piston and 30 click damping adjustment for fine tuning. For the front the camber top is a CNC machined billet top mount allowing full on car camber adjustment!

Camber adjustment is done via the pillow ball. Drilling is NOT required unlike other camber tops!

The rear system is completely bolt in and allows a massive range of height adjustment, from the upper arms sitting on the chassis rails to above standard height. Kit comes with 2 tabs to re-enforce the lower mount which is welded onto the OE factory stub axle.

Tube ID is 45mm and suits both 45-46mm ID tubes. Can be machined out or pressed over a 46mm tube if surface is clean and prepped! Custom spring rates can be provided for race or engine change/weight requirements. 5 year warranty.

* Silver version shown

Specifications

  • Front Upper Mounting: Pillow Ball
  • Rear Upper Mounting: Aluminum Top Mount
  • Front Spring Rate: 4.5kg / 252lb
  • Rear Spring Rate: 3.8kg / 212lb

Compatibility

  • 1970-1976 Mazda RX 2
  • 1970-1978 Mazda Capella

MAZDA RX2 / Capella 1970-1978 XYZ Racing Super Sport Coilovers - Black Top Mount - MARX2-SS_BLK

XYZ Racing's early Mazda RX2 / Capella coilover system is a full performance upgrade designed here in Australia by Performance Suspension. Using XYZ Racing technology it features both spring and body adjustment meaning spring pre-load or working suspension travel can be optimized via the spring seat, while final height adjustment is done via the lower mount.

Shock unit is the XYZ Racing performance Mono-Tube shock with a 45mm piston and 30 click damping adjustment for fine tuning. For the front the camber top is a CNC machined billet top mount allowing full on car camber adjustment!

Camber adjustment is done via the pillow ball. Drilling is NOT required unlike other camber tops!

The rear system is completely bolt in and allows a massive range of height adjustment, from the upper arms sitting on the chassis rails to above standard height. Kit comes with 2 tabs to re-enforce the lower mount which is welded onto the OE factory stub axle.

Tube ID is 45mm and suits both 45-46mm ID tubes. Can be machined out or pressed over a 46mm tube if surface is clean and prepped! Custom spring rates can be provided for race or engine change/weight requirements. 5 year warranty.

* Silver version shown

Black Top Mount

  • Tube ID is 45mm and suits both 45-46mm ID tubes
  • Can be machined out or pressed over a 46mm tube if surface is clean and prepped!
  • Custom spring rates can be provided for race or engine change/weight requirements
  • 5 year warranty
  • Front Upper Mounting: Pillow Ball
  • Rear Upper Mounting: Aluminum Top Mount
  • Front Spring Rate: 4.5kg / 252lb
  • Rear Spring Rate: 3.8kg / 212lb
  • 1970-1976 Mazda RX 2
  • 1970-1978 Mazda Capella

Best Sellers