Description

These Kinugawa TD06H-20G turbos are a bolt on replacement for the TD04 and VF-Series single-scroll turbo found on the 2008-2014 WRX, 2008-2012 Forester XT and 2007-2009 Liberty GT with EJ25. Available with either cast or billet compressor wheels and 9-blade or 11-blade turbine wheels. TD06H is only available with the 8cm turbine housing.

Supplied with generic Subaru fitting kit including replacement Subaru fitment gaskets, studs, nuts and bolts (where required), as well as oil and water lines with fittings. Oil/water lines are not vehicle specific and may require modification or additional components for installation.

Specifications

  • Compressor Wheel (Inducer/Exducer): 52.5 / 68mm (20G)
  • Turbine Wheel (Inducer/Exducer): 58.8 / 67.2 mm (TD06H)
  • Finish: Standard
  • Turbine Blade: 9 Blade
  • Turbine Housing: 8cm
  • Turbine Inlet: for Subaru single scroll type
  • Turbine Outlet: for Subaru single scroll type
  • Compressor Inlet: Stock 2.4
  • Max Hp: 400~450HP
  • Boost limited: 2.8Bar
  • Suggested boost: 1.5Bar
  • Cooling System: Oil and water cooled
  • Bearing: Journal bearing system (performance thrust bearing kit)
  • Actuator Pressure: 1.0Bar/14.7psi Default (0.5, 0.8, 1.0, 1.2, 1.5, 1.7, 2.0 Bar pressures available, specify in shipping comments)
  • Generic Subaru fitting kit supplied

What's Included

  • Gaskets
  • Studs
  • Nuts
  • Bolts
  • Water Lines
  • Oil Lines
  • Fittings

Compatibility

  • 2008-2014 Subaru WRX (GE/GJ/GP)
  • 2007-2009 Subaru Liberty GT (BL/BP)
  • 2008-2012 Subaru Forester XT (SH)

These Kinugawa TD06H-20G turbos are a bolt on replacement for the TD04 and VF-Series single-scroll turbo found on the 2008-2014 WRX, 2008-2012 Forester XT and 2007-2009 Liberty GT with EJ25. Available with either cast or billet compressor wheels and 9-blade or 11-blade turbine wheels. TD06H is only available with the 8cm turbine housing.

Supplied with generic Subaru fitting kit including replacement Subaru fitment gaskets, studs, nuts and bolts (where required), as well as oil and water lines with fittings. Oil/water lines are not vehicle specific and may require modification or additional components for installation.

  • Compressor Wheel (Inducer/Exducer): 52.5 / 68mm (20G)
  • Turbine Wheel (Inducer/Exducer): 58.8 / 67.2 mm (TD06H)
  • Finish: Standard
  • Turbine Blade: 9 Blade
  • Turbine Housing: 8cm
  • Turbine Inlet: for Subaru single scroll type
  • Turbine Outlet: for Subaru single scroll type
  • Compressor Inlet: Stock 2.4
  • Max Hp: 400~450HP
  • Boost limited: 2.8Bar
  • Suggested boost: 1.5Bar
  • Cooling System: Oil and water cooled
  • Bearing: Journal bearing system (performance thrust bearing kit)
  • Actuator Pressure: 1.0Bar/14.7psi Default (0.5, 0.8, 1.0, 1.2, 1.5, 1.7, 2.0 Bar pressures available, specify in shipping comments)
  • Generic Subaru fitting kit supplied
  • Gaskets
  • Studs
  • Nuts
  • Bolts
  • Water Lines
  • Oil Lines
  • Fittings
  • 2008-2014 Subaru WRX (GE/GJ/GP)
  • 2007-2009 Subaru Liberty GT (BL/BP)
  • 2008-2012 Subaru Forester XT (SH)

Best Sellers